PROFLEX™ PSP

Pro Stick Patching Compound

DESCRIPTION:

PSP (Pro Stick Patch) is a multi-purpose cementitious floor patching compound and skim coat. PSP is a polymer modified product that is capable of being used as a skim coat or patch by simply adjusting the liquid to powder mix ratio. PSP as an “All Purpose” material for the installer who requires product consolidation without giving up quality and performance. PSP also is designed to give maximum pot life, and regains workability by simply remixing without additional water.

USES:

Provides a patching compound for interior uses with extended pot life. May be used over dry concrete and wood underlayments such as exterior grade plywood prior to the installation of floor coverings. It can be used on, below, or above grade concrete surfaces horizontally or vertically. For repairing interior sub-floors from a perfect featheredge to 1/2”. Application of two layers recommended for greater thickness up to 1”. For preparation of any concrete surface; rough, unleveled, unfinished or burnished prior to installation of floor coverings. Compatible with most floor covering, ceramic tile, epoxy and polyurethane adhesives including dry set mortars used to complete the installation.

ADVANTAGES:

Ready to mix product.
High strength for a variety of applications.
Fast Drying
High Compressive Strength
Feather Edge to 1/2"

SUTIABLE SURFACES:

Concrete
Cement Mortar Beds
Cement Terrazzo
Exterior Grade Plywood (see installation guide)
Backer Boards (see installation guide)

PACKAGING, COVERAGES:

35 lb container
375-415 sq.ft. as skimcoat / 35 lb
30-40 sq.ft. at 1/8" / 35 lb