PROFLEX™ MS-225

Moisture / Vapor Reducer

DESCRIPTION:

PROFLEX™ MS-225 Moisture Vapor Reducer is a polymer based, solvent free product with multiple uses. MS-225 will reduce vapor emission levels on concrete slabs from 9lbs or 85% RH down to acceptable levels. MS-225 can also be used on concrete slabs with moisture levels up to 12lbs or 90% RH when used in a two-coat application. MS-225 also encapsulates old adhesive residue, (including cut-back asphalt adhesive residue), can seal dusty substrates, reduce porosity of gypsum and is alkali resistant.

TYPICAL USE:

MS-225 was developed for use on “Green” concrete slabs in fast track construction, and can be applied to concrete slabs that are not fully cured (28 days)* MS-225 may also be used as a primer for PROFLEX elastomeric membranes where moisture levels occur between 6 lbs to 12 lbs.

ADVANTAGES:

Reduces Moisture Vapor transmission up to 12 lbs or 90% Rh
May be used as a Primer for PROFLEX elastomeric membranes in place of the PR-series where slabs exceed 5#/1000sqft.-24 hours
Seals Dusty Substrates, Reduces porosity of Gypsum, Alkali resistant
Ideal for Fast-Track projects for concrete slabs not at full cure time (28 days)

SUTIABLE SURFACES:

Concrete (Poured, Prestressed, Precast)
Cured (Mortar Beds, Self Leveling Compounds, Gypcrete)
Concrete Backerboards
Wood (Exterior Grade Plywood, Hardwood, Toungue and Groove, OSB)

COVERAGES, PACKAGING:

1 Gallon (3.87l) Container, 4 Containers/ Carton
4 Gallon (15.48l) Container, 48 Containers/ Pallet
For surfaces requiring up to 9#/1000sqft. or 85% rH 300sq.ft per gallon in a single coat application
For surfaces requiring up to 12#/1000sqft. or 90% rH 225sq.ft per gallon in a two coat application