Pro Stick 50 (Medium Bed Mortar) | Proflex Products Inc.

PROFLEX™ PROFLEX PRO-STICK 50 is a (ANSI 118.11) latex modified, fiber reinforced, medium bed mortar composed of sand, cement, and resins used to adhere a variety of tile surfaces, natural stone, marble, and granite, to approved substrates. Specially formulated to hold large format tiles and stone surfaces in place on vertical surfaces, and reduces unevenness caused by setting tile on horizontal surfaces. PRO-STICK 50 is applied in thickness from 3/16 to 3/4 inches to adhere marble, granite, and tile, to plaster, drywall, concrete, and masonry surfaces. Designed to set tiles vertically of up to 5 lbs. per sq. ft.. (Larger sized units must be field tested to determine suitability).

PROFLEX™ PROFLEX PRO-STICK 50 is a (ANSI 118.11) latex modified, fiber reinforced, medium bed mortar composed of sand, cement, and resins used to adhere a variety of tile surfaces, natural stone, marble, and granite, to approved substrates. Specially formulated to hold large format tiles and stone surfaces in place on vertical surfaces, and reduces unevenness caused by setting tile on horizontal surfaces. PRO-STICK 50 is applied in thickness from 3/16 to 3/4 inches to adhere marble, granite, and tile, to plaster, drywall, concrete, and masonry surfaces. Designed to set tiles vertically of up to 5 lbs. per sq. ft.. (Larger sized units must be field tested to determine suitability).

USES:

For installation of: Ceramic tile, Pavers, Quarry tile, Porcelain tile, Clay bodied tile, High bottom lugged tile, Marble, Granite, Mosaic, large format tiles, Vertical tile installations up to 5 lbs per sq.ft For installation over: Tile backerboard, Plumb and true masonry, Properly cured and finished concrete, Gypsum plaster, gypsum block or gypsum board (dry areas – walls only), Cured portland cement mortar, exterior grade plywood, plastic laminates, masonry surfaces.

ADVANTAGES:

Non-Sag formula supports heavy tiles and ungaged natural stone surfaces
For interior and exterior applications
Builds up to 3/4” with minimal shrinkage
ANSI A118.11, 118.4, 118.1, and 108.5 compliant

SUITABLE SURFACES:

Backer Boards
Plumb and True Masonry
Cured and Finished Concrete
Gypsum Wallboard (dry areas only)
Cured Portland Cement
Exterior Grade Plywood
Plastic Laminate
Masonry Surfaces
Proflex Membranes and Underlayments (see warranty’s)

COVERAGES, PACKAGING:

50 lb Bag
3/4″ x 9/16″ x 3/8″ U notch trowel 40-45 sq.ft.
1/2″ x 1/2″ x 1/2″ square notch trowel 40-50 sq.ft.
1/4″ x 3/8″ x 1/4″ square notch trowel 70-80 sq.ft.

Requires Adobe Reader Data Sheet

Requires Adobe Reader Installation Guidelines n/a

Requires Adobe Reader Material Safety Data Sheet

Requires Adobe Reader Bronze 5 Year Warranty

Requires Adobe Reader Silver 15 Year Warranty

Requires Adobe Reader Gold Limited Lifetime Warranty

Warranty based on the system of materials used to install finish flooring products.
Please refer to our full warranty information for specific terms and conditions.

n/a